Appro WH300 Betriebsanweisung PDF herunterladen (Seite 16)

Rev. 2.0

1/23/06

Appro WH300 User’s Guide 15

by configuring the SSU option does not make the interrupt

available.

3.7.3 Installing a 5.25-inch Removable Media Device

Two 5.25-inch half-height bays provide space for tape backup, CD-ROM, or other

removable media drives.



NOTE

Save the EMI shields: EMI integrity and cooling are both

protected by having drives installed in the bays or EMI

shields covering the bays. When you install a drive, save the

shield to reinstall in case you should later remove the drive

and not reinstall one in the same bay.

1. Remove the EMI shield from the 5.25-in device drive bay (letter A in the

following figure). Move latch to the “unlock” position (letter B in the figure).

2. Insert CD-ROM or DVD-ROM drive into the 5.25-in device drive bay (letter C in

the following figure).

3. Line up holes in CD-ROM drive with holes in chassis (letter D in the figure).

Move latch to the “lock” position (letter E in the figure below).

4. Connect power (P3 or P4 connector from the power supply) and data cables to the

rear of the CD-ROM or DVD-ROM drive (letter F in the figure).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Keine Kommentare

Appro WH300 Betriebsanweisung Seite 16