Appro SD-7800 Installationsanleitung PDF herunterladen (Seite 13)

7800 Series Keypad Installation Guide 11

Site Code Position

Enter the site code start position in the data string. Press

any select area to enter a number between 0-255. Press

COMMAND to save the entry. Default is 1.

Site Code Length

Enter the number of characters the site code contains.

Press any select area to enter a number between 1-16.

Press COMMAND to save the entry. Default is 8.

User Code Position

Dene the User Code start bit position. Press any select

area to enter a number between 0-255. Press COMMAND

to save the entry. Default is 9.

User Code Length

Dene the number of User Code bits. Press any select

area to enter a custom number. Custom numbers can only

be a number between 16-32. Press COMMAND to save the

entry. The default is the DMP value of 16.

REQUIRE SITE

CODE: NO YES

Require Site Code

Press YES to use a site code, for non-DMP cards, and press

CMD to view the site code entry display. Default is NO.

In addition to User Code verication, door access is only

granted when any one site code programmed at the SITE

CODES entry option matches the site code received in the

Wiegand string. You can program up to eight three-digit

site codes.

Note: A card with a site code greater than three digits

cannot be used. Use only cards with three-digit

site codes.

SITE CODES 1-4

> > > >

Site Codes 1-4

Enter site codes 1-4 (left to right separated by > sign).

Press the > sign to add, delete, or change the site code.

Press COMMAND to save the entry.

Site code range is 0-999.

SITE CODES 5-8

> > > >

Site Codes 5-8

Enter site codes 5-8 (left to right separated by > sign).

Press the > sign to add, delete, or change the site code.

Press COMMAND to save the entry.

Site code range is 0-999.

No Communication With Panel

This option denes the relay action when communication

with the panel has not occurred for ve seconds. Press

any select area to display CHOOSE ACTION.

The default is Relay Always Off.

Choose the No Communication with Panel action that

is required.

Press OFF to choose [Default] (Relay Always Off) —

The relay does not turn on when any Wiegand string is

received. Off does not affect any REX operation.

SITE CODE:

POSITION 1

SITE CODE:

LENGTH 8

USER CODE:

POSITION 9

USER CODE:

LENGTH 16

NO COMM WITH PNL

OFF

CHOOSE ACTION

OFF SITE ANY ON

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Appro SD-7800 Installationsanleitung Seite 13

Kommentare zu diesen Handbüchern